MSD Technical Services
(Standardized Fees)

 

No. PARTICULARS

Current
Rate (P)

Student
Rate (P)

 1 Adhesion by Tape Test without Optical Stereomicroscope
(ASTM D 3359)
 2 Cold Crushing Strength 4,075.00 3,260.00
 3 Color Measurement of Solid Sample/s by Chromameter
 4 Det. Of Compressive Strength and Water Absorption 2,475.00 1,979.00
 5 Det. Of Compressive Strength of Ordinary Bricks    630.00    504.00
 6 Det. of modulus of Rupture for one sample 1,568.00 1,255.00
 7 Det.  Of Water Absorption 1,485.00 1,188.00
 8 Elemental Analysis by X-ray Fluorescence/Energy Dispersive (XRF-EDX) One sample 2,352.00 1,882.00
 9 Fire Testing and Evaluation of Firecrete Fireproofing Materials 7,473.00 5,978.00
10 Firing at 800°C 2,060.00 1,648.00
11 Firing at 1000°C 1,540.00 1,232.00
12 Firing of Refractory Castables 4,265.00 3,411.00
13 Immersion and Laboratory Performance testing of Industrial Protective Coating on Steel/Concrete Test Panels (ASTM D6943-03) 9,928.00 7,942.00
14 Microstructural Analysis by Transmission Electron Microscope (TEM) – TEM Imaging (Bright/Dar Field: 4 images/sample) 10,749.00 8,599.00
15 Microstructural Analysis by Transmission Electron Microscope (TEM) – TEM Imaging (4 images and 4 SAED images/sample or 4 images and 2 NBD images/sample) 12,542.00 10,033.00
16 Microstructural Analysis by Transmission Electron Microscope (TEM) – TEM Imaging (4 images and 4 point analysis per sample) 12,542.00 10,033.00
17 Optical Microscopy by Stereomicroscope (up to 3 samples)
18 Particle Size Analysis by Dynamic Scattering Particle Size Analyzer (one sample) 2,265.00 1,812.00
19 Pot Milling of Mineral Powder (500 kg-1 kg capacity) (24 hrs.) 1,844.00 1,476.00
20 Preliminary Evaluation of One Red Clay Sample (for one month) 7,481.00 5,984.00
21 Special Gloss Measurement (ASTM D-523) (for 1-3 samples)
22 Surface Area Analysis by BET Sorptometer 2,901.00 2,321.00
23 Surface Roughness Analysis & Imaging with Measurement by Atomic Force Microscope 2,846.00 2,277.00
24 Use of Compression Molding Machine
25 Use of Electrospinning Apparatus
26 Use of Grinder
27 Use of Injection Molding Machine
28 Use of Ion Sputter for Sample Coating 1,188.00 951.00
29 Use of Single Screw Extruder
30 Use of Spray Dryer
31 Use of Twin Screw Extruder
32 Use of Two Roll Mill & Compression Molding Machine
33 Use of Vacuum Mixer
34 Use of Vacuum Oven
35 X-ray Diffraction Analysis 4,364.00 3,492.00